Forum Replies Created
- Posts
dw7832:
Have you tried to copy the dictionary files to
c:UsersAppDataRoamingEmurasoftEmEditorSpell
(use the appropriate for your account)?
Many thanks, Yutaka. I can confirm that the Bulgarian spell checking is working fine now. I will try later on with Russian, but do expect that it will be all right, as well.
So far as the traditional spell-checking facilities I suggested in an earlier posting are concerned, these would be very useful if one has to modify an existing large file, especially if has not been spell-checked before and there is intensive syntax highlighting. In this case it can prove difficult to spot all underlined words. The “on-the-fly” approach works very well when creating a new file.
Many thanks for including hunspell support!
It does work as intended (and very quickly!) for en_US, but I am also having trouble while attempting to use additional dictionaries with the 64bit version, in my case, Bulgarian. I extracted the proper bg_BG.dic and bg_BG.aff to
c:Program FilesEmEditorDictionaries
and to
c:UsersAppDataRoamingEmurasoftEmEditorSpellbg_BG is available for selecting as a dictionary, but all Bulgarian words are underlined, even if spelled correctly, and there are no suggestions in the right-click menu. I guess that this is some kind of an encoding problem, but it will need to be ironed out.
I wonder if it would be possible to include some more traditional spelling functions in addition to the “spell-as-you-type” facility, for example, a traditional spell-check that goes through all unrecognised words and offers suggestions, as well as an option to accept a word for the current session.
Dear Yutaka,
Many thanks for the elegant macro. However, this is not what I was after: As I had mentioned earlier on, I can write a macro that copies selected portions of text b/n files; what I was after was a way of recording such a macro. I do not want to have to write a separate macro (or modify an existing one) each time I need to grab similarly shaped pieces of text from one file and put them in some different order into a different file. All that is required is the ability to record the keystrokes that switch between different files; I cannot get these keystrokes recorded with the current version of EmEditor (9.06, 64bit).
A more detailed description of the “Automatic workspace problem” (again using 9.06 64bit, under Windows 7 Professional 64bit). I start with Customize -> Window -> Automatic workspace set to “None”, and a single empty file “Untitled”. I then switch Customize -> Window -> Automatic workspace to “Save and Restore”, and drop two files onto the EmEditor, these get opened. Then I close both files by pressing the “x” icons on the file tabs, this leaves a single open empty file “Untitled”, after which I close EmEditor. When I re-start EmEditor, it opens up not with an empty “Untitled” file, but with one of the two files that I had dropped onto it earlier on (the one that was closed last).
Now, if I try to open additional files in EmEditor by executing “emeditor file1”, “emeditor file2”, etc, all of these files are opened in different tabs. If I close all of these tabs and then close EmEditor and start it again, I would expect to get a single empty file “Untitled”. However, EmEditor opens all files that I had closed previously in different tabs.
Best wishes,
betaspinI guess that my first question was perhaps not phrased sufficiently clearly. I am much interested in a solution, so let me try to explain what I would like to do again.
Imagine EmEditor is open with just two files, an empty one, and a second file containing the lines
abcd
efgh
ijkl
mnopI am in position 1 of line 1 of the first empty file and would like to record a macro that copies line by line the contents of the second file into the first one. The keystrokes I need to copy one line are as follows:
Well, I cannot get EmEditor to record a macro that executes this sequence of keystrokes and any ideas as to how to do this would be much appreciated. I can write a macro that does all this, but I have to do this operation frequently with different chunks of data, sometimes lines and sometimes columns of numbers, and having to write a separate macro each time rather than simply record it would be a waste of time.
Oh, and something else that I noticed very recently: When I have the “Automatic Workspace” set to any option that includes “Save and Restore”, and have two open files, if I close both files, then exit EmEditor, then start it again, both files are re-opened. I would expect EmEditor to open with a single empty file, as this was the last state in which it was before it was exited. The current behaviour appears to be inconsistent, and I wonder if this could be fixed at some moment.
The ClearType font rendering problem with the Horizontal Line and/or Vertical Line (Properties for Current Configuration -> Scroll tab) has been resolved in v9.01, many thanks!
So far as the attempts to connect to the Internet, these are continuing with the Update Checker set to “Never” (this is with the 64bit version), which is not a big deal but still can be classified as unexpected behaviour (I have decided to permanently allow these through my firewall, classifying EmEditor as a “web browser”).
Yutaka wrote:
I am aware of the bold rendering issue with some ClearType fonts. I will try to fix this issue near future.EmEditor will not connect to the Internet if you set “Never” in the Customize Update Checker dialog box (on the Help menu) except for when you enter the registration key. If you still have issues, can you describe the details more and you can also email me at [email protected] . Thanks!
Many thanks for the prompt reply. It appears that the problem with the ClearType font rendering is most pronounced when the Horizontal Line and/or Vertical Line have been enabled (Properties for Current Configuration -> Scroll tab). Without these lines (which are a nice feature that I would like to be able to use together with ClearType), the fonts are rendered reasonably well.
I have set Customize Update Checker to “Never” but still, every time I start the editor, it tries to connect to 74.55.18.114 (murasoft.site5.com) on port 80.
