Forum Replies Created
- Posts
@Yutaka ,
—————————><Put cursor here.
———->
->
——————->
——->
—————————><<<
Put the cursor between “><” in the 1st line.
Press Down/Up key.
The single cursor actually keeps the initial X position, unless you move it horizontally.When in multiple-cursor mode, each cursor should move as a single cursor.
The current change is not good. I can’t see its usefulness.
—————
Thank you for the change on Ctrl+clicking.
Hope the other issues can be improved when you have time:
https://www.emeditor.com/forums/topic/multiple-selection-editing/Issue 2+:
“Never and Keep Original Text when Completes” is set.
Type and select “default” in the candidate list.
** Type “define”. But the selection in the list stays at “default” all the time.Thank you for the fix.
Perhaps a little further fix is needed:
The more icons it shows, the bigger the gap would be.
https://image.ibb.co/cVd7m9/Em-Editor-Tab-Icons.pngBTW 1:
In “Compare” menu, “Compare A with B” item is ticked when enabled.
** But “Synchronize Scrolling between A and B” item is not ticked when enabled.BTW 2:
Turn on Compare or Synchronize first.
Then turn on ReadOnly.
** Compare/Synchronize is turned off.> Suggestion 1:
Put the text below into EmEditor and follow the description in it:1,< 1,< 1,< 1,< 1,< 1,< 1,< 1,< 1,< 1,< (Line 10) 1,Scroll down and make the above 10 lines invisible. 1,CSV mode. 1,Make this cell long enough (or narrow the window) so that the text goes beyond the right edge and the horizontal scroll is available. 1,Scroll to leftmost so that the 1st column is totally visible. 1,- 1,- 1,- 1,- 1,- 1,- 1,- (Line 20) 1,< 1,< 1,< 1,< 1,< 1,< 1,< 1,< 1,< 1,Put cursor here->< (Line 30) 1,Filter with "<".Result:
** The view scrolled horizontally and the 1st column is invisible.
** The current vertical relative position also changed, which I think should also be prevented if possible.—————
> Suggestion 2:
Normal or CSV mode.
Put cursor within “cursor” in the sample text.
Use “Filter without Selection or Word at Cursor” command.> Issue 1:
Did you enable the Regular Expression option?
And ensure that “Move to Start/End” is enabled, or search from the top.> BTW 1:
In “Additional Lines to Search for Regular Expressions” box,
Hold down any number key a little while,
Then press Up key,
It should turn to maximum (10000).
** But it’s odd that if you do so with 4 or 5 or 6, it turns to 1.> Quote Character in General page of configuration properties can take several characters, and it is used in “Copy Text in Qutoes” command in the Edit menu.
** But the “Quote Marks” in Display page is only a list of single characters, isn’t it?Issue 3:
“Never” or “Never and Keep Original Text when Completes” is set.
Type “need”.
** The list is empty.When a shortcut key triggers multiple snippets, we get a menu.
Is it possible to make the menu support &Accelerator Keys? which would be more intuitive than serial numbers. And the order would be less important.Issue 5:
I’ve customized all the menus except “Context” and “Tray(1)”.
** But not knowing why, in “Tray Icon Menu (2)” and “Tab Menu”, a “POPUP” is added at the top level, and the old menu goes to the 2nd level.
If I click OK, the added “POPUP” will be saved.
Since v18.0.4.Issue 6:
Delete all the items in a menu.
** Some buttons are not disabled instantly. (Though it doesn’t matter.)
Switch to another menu and switch back.
** All the buttons are disabled.Issue 7:
Menu Properties:
The “Commands” list needs horizontal scrollbar when necessary.Issue 8:
Select an item in “Defined Menu” box.
Press F2 and shorten its name.
** See the length of the background color of it.Issue 9:
Select a command in “Defined Menu” box.
Press F2 and change its name.
Open its properties.
** The text in the “Name” box is still the default one.
Click OK.
** The name is emptied.Issue 1+:
Maybe the height of “Menu to Customize” list should be limited according to the total number of the menus.
And the buttons should sink along with the “Defined Menu” box.
Or, left-right layout might be better than top-bottom layout.Issue 1+:
Press a shortcut key that is already assigned to an external tool or a macro.
Click the [>] button.
** The [<] button is enabled but does not work.> Issue 1-2:
When a (snippet/ActiveString) tooltip seizes the focus, and I happen to press Alt+F4, the tooltip will be closed and will never show again in the current window.When a snippet tooltip seizes the focus, it can not be closed with Esc key.
Suggestion 1:
Is it possible to add a way (e.g. a shortcut key) to go back to EmEditorView when a (snippet/ActiveString) tooltip seizes the focus?Suggestion 2:
Is it possible to make EmEditor obey the system setting “Hide pointer while typing” (in Mouse Properties)?Suggestion 3:
I notice that a few of the list items are truncated by default (see below), which will show a tooltip. Such a tooltip does not seize the focus. Is it possible to make the snippet/ActiveString tooltip that way?Customize: Edit: 1 item. CSV: 1 item. Active String: 3 items. Configuration properties: Scroll: Options: 4 items.> Issue 2:
Seems it doesn’t occur initially.
The more text you type in the current tab, the slower it goes. While either of the other three options works fine.
Several lines would be enough to see the obvious slowdown.
Later the delay could be more than 10 seconds. And see the CPU usage.
(The default dictionary is used.)Issue A:
Disable and enable WordComplete.
Type “s”. The list shows the candidates instantly and stably (without any flicker).
Delete and type “s” again.
** The list flickers. (Say it in slow motion: blink-blaaank-show.)
I think this still needs to be optimized.Issue B:
Open a new tab. Type something. WordComplete works.
Detach the tab. Type something.
** WordComplete does not work, till you disable and enable it again, or use “Show Candidates Manually” command once.Issue C:
When both a (snippet/ActiveString) tooltip and the WordComplete candidate list show simultaneously, sometimes the list dodges the tooltip, but sometimes the tooltip covers the list.
Can this be optimized?Suggestion C1:
I think “Show Candidates Manually” command could be a toggle switch. So one can close the candidate list via this shortcut key.
Currently, when both a tooltip and the WordComplete candidate list show simultaneously, Esc key closes the tooltip first.Suggestion C2:
Should also be able to temporarily close the ActiveString tooltip by using Esc key.> Suggestion 2:
The Reset button is only displayed for English and Japanese language?> Suggestion 3:
“…” button (in Dictionaries page) is not working properly.
When the “Dictionary File” box is empty, or when the path is unavailable/invalid:
Click “…”. Select a file. Open.
** See the result in the “Dictionary File” box.> Issue 2:
Options page: “Number of Characters” = 1.
“Both in Candidates and in Typing” is set.
Type “s” (lower case).
** The candidate list is very very slow.==========
> Suggestion 3:
Clicking “…” button (in Dictionaries page) should open the default “Dictionaries” folder when the “Dictionary File” box is empty, or when the path is unavailable/invalid.Suggestion:
(If issue E will be implemented in the future.)
Need a way to add user word forcedly.
Or make the “Add to Dictionary” command available all the time.
Reason:
For example, the default dictionary has “alway” but has no “always”; has “property” but has no “properties”.EmEditor has “Restore Deleted String” command.
Is it possible to (add an option to) exempt the WordComplete/SpellingSuggestion deletion from being the “Deleted String”?And I think it’s necessary to add some characteristic (e.g. serial number, or even the name of the source control) to the title of the “Grabbed Text” window.
> Issue D:
+ The wrapping mode should be other than “No Wrap”.> Issue E:
I think this is necessary. But let it be an option.
UserDic.bin is just like the user-defined strings in Highlight (1).In Keyboard Map, double-clicking on an Option item is still not working, though the default menu/button (Jump) works.
By the way,
The default button for Symbols doesn’t show the text “Jump”, since the ones for Commands and Options show.Issue 1-2:
When Find dialog is open,
A Marker-to-Replace transfer fails to send the string into the Find box.Issue 1-3:
When Find/Replace dialog is open,
A Marker-to-Replace transfer will uncheck these 2 options (if they are checked):
Incremental Search
In the Selection Only
Is this inevitable?Issue 1-4:
When Find/Replace dialog is open, with “Use Regular Expressions” checked,
R-click a non-regex marker and select “Replace…”
** “Use Escape Sequence” is still grayed.Issue 2-2:
When Find/Replace dialog is open,
A Marker-to-Replace transfer never triggers the matched FRP.> Issue D:
When DirectWrite is off.> Issue E:
CheckSpelling saves the user-added words in UserDic.bin.
But WordComplete doesn’t read this file.> Issue G:
orangオレンジorangオレンジorang
orang橘orang橘orang
orang오렌지orang오렌지orang
You can see the red wiggly line on each “orang”.
Set the text cursor within each “orang” and compare the candidate list.
WordComplete works as expected only in the “オレンジ” line. Apparently you’ve optimized it for kanas.Issue ZZ:
Hope these items in Spelling Suggestion menu will also have the accelerator keys (underlined letters):
Add to Dictionary
Ignore All> “currDoc.Activate();” was necessary before the “doc.Saved = true;” line because a particular internal code reason.
Sorry but I mean the last statement, not the one before “doc.Saved = true” in the circle.
——————————
> We can’t allow EmEditor grabbing EmEditor if both documents are in the same group window by design. Why do you need this ability?No I don’t really need “grabbing in same group”.
But I do need “EmEditor grabbing EmEditor” whatever way.
My Tab setting is “Open in: New Window”. So actually I’m using “grabbing into a new window”.
I use “EmEditor grabbing EmEditor” as a fast and easy way to keep a midway version of the text on the fly during a processing.
So please enable it. Thank you.Issue D is not fixed yet.
Issue E:
WordComplete needs an option for words in UserDic.bin.Issue F:
The default en_US.dic is CP-1252. Some characters could be displayed incorrectly in the candidate list on different OS’s, e.g.:
Ångström
cliché
clientèle
I converted en_US.dic to UTF-16LE+s (since UserDic.bin is). Seems work well for WordComplete, but not for CheckSpelling.Issue G:
CheckSpelling can recognize the word between 2 non-Latin characters (with no spaces). But WordComplete can not.Issue H:
Type “doc”. The candidate list shows.
“docc”. The list hides.
Press Backspace.
I think the list should show again.Issue I:
When “QAZ” is deleted in the document, it will be cleared from the candidates.
But when “Include All Documents in Group” option is used, and after I closed the other documents in the group, the words from them are still in the candidates, till I detach the tab.—————
Issue J:
“Never and Keep Original Text when Completes” is used.
When both “qaz” and “QAZ” exist in the document, the candidate list displays only the first one (according to the order in the document).
Is this as expected?The description for “Never” in CHM is not quite clear for me:
> For instance, suppose ABC and abc are found in the current document (or a dictionary file).
> If Never is selected, either ABC or abc can be used as a candidate, and typing either A or a displays either ABC or abc.I think “the first one loaded” should be stressed, rather than use “either”.
—————
Suggestion 3:
Hope the candidate list can be cycled to the bottom/top by pressing Up/Down key.
Or make Home/End key also available in the candidate list, since PageUp/PageDown key can be used.I forgot the “Grabbed Text” cases at the time… Sorry again.
As for the macro, I use “Close without Save” editor.ExecuteCommandByID(4120) instead, in case there’s any “Grabbed Text” tab in the group.
But I don’t understand your last statement currDoc.Activate(). What’s it for since the window is closed?But please don’t disable “EmEditor grabbing EmEditor” if there’s no critical disadvantage.
Could crash on large files? But I never use it on large files.Issue 3-2:
A “Grabbed Text” tab initially has one step of Undo history.
Is this inevitable?Issue 3-3:
Press Ctrl+A and Delete key in a tab. The tab has no “*” now.
I don’t think this is correct logically.
Same result in issue 3-2 when we use Ctrl+Z.> Issue 4:
In that case, I split only for that file. So when job finished, I expect the initial view.
But it’s acceptable if it’s by design.> Issue C:
In Keyboard Map,
When searching in Commands, double-clicking a result jumps to the Properties.
So when searching in Options, I hope double-clicking a result will jump to the Option.Currently, in Quick Launch, Option results can be double-clicked. But the default menu item is “Run This Command”, which I think is not proper.
