Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • March 1, 2021 at 3:46 am #27352
    LTT
    Participant

    Open file AAA.
    Ensure the caret is not at EOF.
    Then run with this command line:
    EmEditor.exe /l -1 /cl -1 AAA
    “/cl -1” doesn’t work if the file is already open.

    Open file AAA.
    Ensure the caret is not at EOF.
    Close file AAA.
    Then run with this command line:
    EmEditor.exe /l -1 /cl -1 AAA
    The whole “/l -1 /cl -1” doesn’t work. I believe it’s because the saved position works later.

    March 11, 2021 at 7:25 pm #27363
    Yutaka Emura
    Keymaster

    The first issue was fixed on v20.5.911. I am not sure if the second issue was fully fixed. Please check and let me know if there are issues.
    Thanks,

    March 12, 2021 at 3:57 am #27364
    LTT
    Participant

    Issue 1 is fixed.
    Issue 2 is not fixed at all.

    March 12, 2021 at 9:19 am #27367
    Yutaka Emura
    Keymaster

    Please write procedure and conditions to reproduce Issue 2. You can try resetting all settings after export (or try installing a fresh portable version) and see if you can reproduce the issue. If the issue was resolved, you can enable some settings that you use until you see the issue.

    March 15, 2021 at 1:53 am #27373
    LTT
    Participant

    Please test and fix this issue (3) first:

    Default settings.
    Enable “Save Cursor Position”.
    Open file A, which is never opened in EmEditor.
    Change cursor position.
    Close A.
    Reopen A.
    ** It doesn’t save the cursor position, till “Save Bookmarks” is once enabled.
    ** This issue will happen on another never-opened file after “Save Bookmarks” is disabled.

    I will test issue 2 if issue 3 is fixed.

    March 15, 2021 at 2:50 pm #27374
    Yutaka Emura
    Keymaster

    Both these issue (2 and 3) are being fixed on 20.5.915. Thank you!

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.