- Posts
Issue 1:
WordComplete is enabled.
One window and one tab (empty).
Enable the option: Do not share process between documents (disables tabs).
It will ask “… EmEditor will restart now.”
OK.
** It will ask to “Close All”. (It’s unnecessary in this case for there’s only one new tab.)
Select “Close All”.
** EmEditor exits but won’t restart.
Actually this is a crash. Because I find e.g. the change of Recent File List has not been saved.Issue 2:
WordComplete is enabled.
Open tab-1 with configuration A. WordComplete uses the properties for configuration A.
Now open tab-2 with configuration B.
Go back to tab-1.
** Now in tab-1 WordComplete uses the properties for configuration B.Issue 3:
The candidate list should automatically move away from the scroll/output bar, or get in front of it.
See the image: (Note the Z-order is not correct as well in the left/middle image.)
http://p1.pichost.me/i/80/2052534.pngIssue 4:
Disabling WordComplete should also close the candidate list if it is shown.+ Suggestion:
Is it possible to make WordComplete also work for multiple selections?Hello,
I am fixing all issues except Issue 2. Can you please provide a procedure to reproduce this issue? How can you tell that in tab-1 WordComplete uses the properties for configuration B?
Are you using the portable version or the installer version of EmEditor?Thanks,
Issue 1 is not yet fixed for some conditions.
1. Initial launch EmEditor 17.1.3 portable version 64 bit
2. Enable “Word Complete” plugin
3. Enable “Do not share process between documents”
4. Restart
=> OKBut if add a new plugin from the Library, for example: “Bookmarks” or “FindAndCenter”…etc
And then repeat above step 2 ~ step 4, it will be crash.Hello sky,
The crash is due to old plug-ins with the older library. All the standard plug-ins (which come with the EmEditor installer) are fixed with v17.1.3.
>Issue 2:
Thanks for the clue.
I tested in v17.1.4 and confirmed that both issue 1 and 2 were caused by certain old plug-ins.
So the only choice is to find and remove them?If the reply is still needed:
I can tell it because the contents of Highlight (1) and the settings of WordComplete are different between A and B.——————–
>Issue 3:
+ Minimap
+ Status bar——————–
Issue 5:
When a configuration name is obsolete, the data needs to be cleared in such entries:
HKCU\Software\EmSoft\EmEditorPlugIns\WordComplete
HKCU\Software\EmSoft\EmEditorPlugIns\OutlineTextCorrection:
Issue 2 is actually caused by Snippets:
Run Snippets background or foreground.
Enable WordComplete.
Open tab-1 with configuration “x86 Assembler”.
Open tab-2 with configuration “Bat”.
Go back to tab-1.
Input “e”.
** You can see that in tab-1 WordComplete is using the keywords for configuration “Bat”.Issue 6:
Set “Bat” as default configuration.
Enable WordComplete.
Exit.
Restart.
Input “e”.
** WordComplete will not load the keywords, unless you disable and enable it again, or select the configuration again.Issue 2 still occurs when a dictionary is used:
Default Settings.
Run Snippets background or foreground.
Enable WordComplete.
Open tab-1 with configuration “Text”. Add a dictionary file in its WordComplete properties.
Open tab-2 with configuration “Bat”.
Go back to tab-1. Input “e”.
** Now in tab-1 (“Text” configuration) WordComplete is *not* using the dictionary.
Disable and enable WordComplete.
Go to tab-2. Input “e”.
** Now in tab-2 (“Bat” configuration) WordComplete is *using the dictionary*.Disable Snippets totally.
Disable and enable WordComplete.
Now everything is OK.We finally figured out the reason of this issue, and it should be fixed on the next version.
Thanks for your patience.Thanks for all the fixes.
I should have been more patient.
Maybe you could mark a pending issue with just “will fix” or “wont fix” next time, to end our nagging and save your attention. :)
How about using something like GitHub’s colorful labels to make the status of an issue clear at a glance?And I think I should report issues one per thread.
- You must be logged in to reply to this topic.